- HOW TO PAIR THE ICMP BLUETOOTH CREDIT CARD READER INSTALL
- HOW TO PAIR THE ICMP BLUETOOTH CREDIT CARD READER SERIAL
- HOW TO PAIR THE ICMP BLUETOOTH CREDIT CARD READER DRIVER
In the meantime, there are two alternatives:
HOW TO PAIR THE ICMP BLUETOOTH CREDIT CARD READER DRIVER
Future driver updates from Marvell may or may not improve the performance. The most recent driver at the time of this publication (Marvell Avastar Bluetooth v.47) is unsupported due to frequent random disconnects and other issues seen in our testing. Below is a list of a few environments in which Bluetooth communications with the iCMP device have been tested: Environment There are many Windows-based laptops, tablets, and desktop systems each having varying levels of support for the Bluetooth protocol. Windows DeviceĪfter selecting Standard, the next screen will display a Bluetooth pairing PIN code. This will enable Commerce SDK to communicate with Ingenico iCMP through the established Bluetooth connection. Pairing of the Android device and Ingenico iCMP is now complete. On the Android device, confirm that Ingenico iCMP appears in the Paired Devices list. Under Available Devices, tap iCM122 (includes some numbers in the name).On the Android device, perform the following: Android DeviceĪfter selecting Standard, the next screen will display a Bluetooth pairing PIN code. Pairing of the iOS device and Ingenico iCMP is now complete.
HOW TO PAIR THE ICMP BLUETOOTH CREDIT CARD READER INSTALL
On the iOS device, tap Cancel to disregard the Install App prompt that appears. On Ingenico iCMP, confirm that the Welcome screen appears.
Swipe the toggle button to switch on Bluetooth.On the iOS device, perform the following: This section is a continuation of the Configure Ingenico iCMP for Bluetooth Connectivity section.Īfter selecting iOS, the next screen will display a blank box. If you want to connect the iCMP to a Windows device, select Standard and follow the instructions in the Pair Ingeico iCMP with a Windows Device.If you want to connect the iCMP to an Android device, select Standard and follow the instructions in the Pair Ingenico iCMP with an Android Device section.If you want to connect the iCMP to an iOS device, select iOS and follow the instructions in the Pair Ingenico iCMP with an iOS Device section.The device will now restart so that the settings can take effect.Īfter the reboot, you will see a screen that gives you two choices: iOS and Standard. Scroll to the Yes value and press the Green button.
Press the Red button until you are presented with a screen that shows Save and reboot? Y/N.
HOW TO PAIR THE ICMP BLUETOOTH CREDIT CARD READER SERIAL
Selection menu, select the USB Serial option and press the Green button. Once on the Communication menu, select the Select Comm option. Once on the Configuration menu, select the Communication option. Once in the TDA menu, select the Configuration option. If you do not see Press F for menu, repeat steps 1 and 2. After a couple more seconds, if you did it correctly you should now see Press F for menu. Make sure to press these keypad buttons within 2 seconds. When the screen appears, quickly press 2, 6, 3, 4, and the Green button. Restart Ingenico iCMP by pushing the button on the right side of the device.ĭuring the reboot process, the Copyright screen will appear.
Use the following keypad buttons to perform specific actions:
0 kommentar(er)
